With GST
WARNING: This page is about a different car, the 2005 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
- Start engine and warm it up to the normal operating temperature.
- Turn ignition switch OFF and wait at least 10 seconds.
- Start engine and keep the engine speed between 3,500 and 4,000 RPM for at least 1 minute under no load.
- Let engine idle for 1 minute.
- Open engine hood.
- Set voltmeter probe between ECM terminals 74 [H02S2 (bank 1) signal], 55 [H02S2 (bank 2) signal] and ground.
- Keep engine speed at 2,500 RPM constant under no load.
- Make sure that the voltage does not vary for more than 5 seconds.
If the voltage fluctuation cycle takes less than 5 seconds, go to Diagnostic Procedure .
- 1 cycle: 0.6-1.0 - 0.3 - 0.6-1.0