LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Frontier Base, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0600: A/T Control (3.3L) >> DTC Confirmation Test (With CONSULT-II)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Test (With CONSULT-II)

  1. Turn ignition on. Select DATA MONITOR mode with CONSULT-II. Start engine. Increase engine speed to more than 1000 RPM, then let it idle for more than 40 seconds.
  2. If DTC 1st trip is detected, go to DIAGNOSTIC PROCEDURE  . If DTC 1st trip is not detected, system is okay at this time.
scientia non olet · About LEMON Manuals