LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Maxima GLE >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0101: Mass Airflow Sensor Circuit Range/Performance Problem >> DTC Confirmation Test "B" (Using Generic Scan Tool)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Test "B" (Using Generic Scan Tool)

NOTE: Use the following test to check overall function of MAF sensor circuit. During this test, 1st trip DTC may not be confirmed.
  1. Start engine and warm to normal operating temperature.
  2. Using scan tool, select MODE 1, and observe MAF sensor signal.
  3. Check for linear increase in MAF signal in response to engine speed increase. Increase engine speed to 4000 RPM.
  4. If operation is as specified, system is okay at this time. If operation is not as specified, go to DIAGNOSTIC PROCEDURE .
scientia non olet · About LEMON Manuals