Sensor Rotor: Installation

Install the sensor rotor. For front sensor rotor, use hammer and wooden block. For rear sensor rotor, use suitable drift and press.

• Always replace sensor rotor with new one.
  Fig 1: Installing Sensor Rotor

  Courtesy of NISSAN MOTOR CO., U.S.A.
• Pay attention to the dimension of rear sensor rotor as show in figure.

  h: 12.5-13.5 mm (0.492-0.531 in) 

  Fig 2: Locating Rear Sensor Rotor

  Courtesy of NISSAN MOTOR CO., U.S.A.