System Description: Inputs: Notes
WARNING: This page is about a different car, the 2005 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
Power is supplied at all times
- To BCM (body control module) terminal 70
- Through 50A fusible link (letter g, located in the fuse and fusible link box).
- To BCM terminal 57
- Through 10A fuse [No. 18, located in the fuse block (J/B)].
When the key is inserted in key switch, power is supplied
- To BCM terminal 37
- Through key switch terminals 1 and 2
- Through 10A fuse (No. 25, located in the fuse and fusible link box).
When the ignition switch is ACC or ON, power is supplied
- To BCM terminal 11
- Through 10A fuse [No. 4, located in the fuse block (J/B)].
When the ignition switch is ON or START, power is supplied
- To BCM terminal 38
- Through 10A fuse [No. 1, located in the fuse block (J/B)].
Keyfob signal is inputted to BCM from the remote keyless entry receiver.
The remote keyless entry system controls operation of the
- Power door lock
- Interior lamp and ignition keyhole illumination
- Panic alarm
- Hazard and horn reminder
- Auto door lock operation