Vehicle Security System Alarm Operation
WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
The vehicle security system is triggered by
- opening a door
- unlocking door without using the key or keyfob.
The vehicle security system will be triggered once the system is in armed phase,
- when BCM receives a ground signal at terminals 12, 13, 47, 48 (door switch).
Power is supplied at all times
- to horn relay terminal 2
- through 15A fuse (No. 25, located in fuse and fusible link box).
When the vehicle security system is triggered, ground is supplied intermittently
- from IPDM E/R terminal 45
- to headlamp high relay and
- to horn relay terminal 1.
The headlamps flash and the horn sounds intermittently.
The alarm automatically turns off after 50 seconds, but will reactivate if the vehicle is tampered with again.