Control When Operating Enable Conditions No Longer Met
WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
OPERATING ENABLE CONDITIONS CHART
| Description | Operation | Full open stop |
|---|---|---|
| Main switch turned OFF | Warning chime active → Shift to manual mode after full open or close operation is complete (Recovery to power mode when main switch turned ON or door fully closed) | → Shift to manual mode |
| A/T selector lever P position | Warning chime active and one-way operation continuous (Warning chime inactive and door fully open or fully closed or operating conditions recovered) |
Stop continued |
| Voltage drop 11 - 9V | One-way operation continued (equivalent to the case of starting voltage ← 11V for handle operation with warning chime active) | Not allowed |
| Voltage drop 6 - 4V (Microcomputer reset voltage - clutch hold voltage) |
|
Control not possible because microcomputer being reset |