Terminals and Reference Value for Sliding Door Control Unit
WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS AND REFERENCE VALUE FOR SLIDING DOOR CONTROL UNIT
| Terminal | Wire Color | Item | Condition | Voltage (V) (Approx.) | ||||
|---|---|---|---|---|---|---|---|---|
| 1 | L/Y(1) BR/W(2) |
Automatic door main switch ON/OFF switch | Automatic door main switch ON | 0 | ||||
| Automatic door main switch OFF | 5 | |||||||
| 2 | R/G | Sliding door open/close switch | Sliding door open/close switch ON | 0 | ||||
| Sliding door open/close switch OFF | 5 | |||||||
| 3 | Y/R(1) P/G(2) |
Sliding door lock/unlock actuator unlock output signal | Power door lock switch door unlock operation | 0 → Battery voltage → 0 | ||||
| Other than above | 0 | |||||||
| 4 | L(1) W/B(2) |
Encoder pulse signal A | Sliding door (motor active) | |||||
| 5 | O/B | Half-latch switch | Sliding door Fully open → half → fully closed | |||||
| 6 | G | Ignition switch | Ignition switch ON | Battery voltage | ||||
| Ignition switch OFF | 0 | |||||||
| 7 | Y(1) Y/B(2) |
Power window serial link | When ignition switch is ON or power window timer operates | |||||
| 8 | LG/B(1) Y/G(2) |
Warning chime output signal | Warning chime ON | 0 | ||||
| Warning chime OFF | 5 | |||||||
| 11 | R(1) G(2) |
Encoder power supply | - | 9 | ||||
| 12 | Y/R | Battery power supply | - | Battery voltage | ||||
| 13 | LG/W(1) | Fuel door interlock switch | Fuel door closed | 0 | ||||
| Fuel door open | 5 | |||||||
| 14 | W/G(1) R/W(2) |
Sliding door switch | OPEN | 0 | ||||
| CLOSED | 5 | |||||||
| 15 | L/W(1) GR/W(2) |
Automatic door main switch | ON | 0 | ||||
| OFF | 5 | |||||||
| 16 | L | Child lockout switch | UNLOCK position | Battery voltage | ||||
| LOCK position while door is closing | 0 | |||||||
| 17 | Y(1) R/B(2) |
Encoder pulse signal B | Sliding door (motor active) | |||||
| 18 | G/Y | A/T device (park position switch) | P position | 0 | ||||
| Other than above | 5 | |||||||
| 22 | G(1) B(2) |
Encoder ground | - | - | ||||
| 23 | B | Ground | - | - | ||||
| 26 | GR/L | Closure motor CLOSE output signal | Sliding door Fully open → half → fully closed | |||||
| 27 | W | Battery power supply | - | Battery voltage | ||||
| 28 | G/Y | Door unlock input | Door lock & unlock switch (Neutral → Unlock) | 0 → Battery voltage | ||||
| 30 | G/Y(1) BR/R(2) |
Sliding door lock motor unlock signal | Door lock (Neutral → Unlock) | 0 → Battery voltage | ||||
| 31 | Y | Closure motor RETURN output signal | Sliding door Fully open → half → fully closed | |||||
| 32 | B | Ground | - | - | ||||
| 33 | R | Sliding door motor OPEN output signal | Sliding door auto OPEN operation (motor active) | Battery voltage | ||||
| Other than above | 0 | |||||||
| 34 | Y | Magnetic clutch power supply | Auto sliding door (Motor active) | 0 | ||||
| Auto sliding door (Motor active to stationary) | ||||||||
| 36 | B | Sliding door motor CLOSE output signal | Sliding door auto CLOSE operation (motor active) | Battery voltage | ||||
| Other than above | 0 | |||||||
| 37 | Y | Magnetic clutch ground | - | - | ||||
|
||||||||