CONSULT-III Function (AIR BAG)
WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.
DIAGNOSTIC TEST MODES REFERENCE CHART
| AIR BAG diagnostic mode | Description |
|---|---|
| SELF-DIAG [CURRENT] | A current Self-diagnosis result (also indicated by the number of warning lamp flashes in the Diagnosis mode) is displayed on the CONSULT-III screen in real time. This refers to a malfunctioning part requiring repairs. |
| SELF-DIAG [PAST] | Diagnosis results previously stored in the memory are displayed on the CONSULT-III screen. The stored results will remain until memory erasing is executed. |
| TROUBLE DIAG RECORD | With TROUBLE DIAG RECORD, diagnosis results previously erased by a reset operation can be displayed on the CONSULT-III screen. |
| ECU DISCRIMINATED NO. | Air bag diagnosis sensor unit ECU discriminated number (identification number) is displayed. Air bag diagnosis sensor unit has individual ECU discriminated number (identification number) based on model and equipment. |
| PASSENGER AIR BAG | The STATUS (readiness) of the front passenger air bag module is displayed. The STATUS displayed (ON/OFF) depends on the signals supplied to the occupant classification system control module and air bag diagnosis sensor unit. Refer to "OCCUPANT CLASSIFICATION SYSTEM (OCS) " for more information. |