LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transaxle (Re4F03B)) >> On Board Diagnostic System Description >> OBD-II Diagnostic Trouble Code (DTC) >> How To Erase DTC (With GST)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How To Erase DTC (With GST)

WARNING: This page is about a different variant/trim than selected.
  1. If the ignition switch stays "ON" after repair work, be sure to turn ignition switch "OFF" once. Wait at least 5 seconds and then turn it "ON" (engine stopped) again.
  2. Perform "OBD-II Self-diagnostic Procedure (No Tools)". Refer to "OBD-II SELF-DIAGNOSTIC PROCEDURE (NO TOOLS) ". (The engine warm-up step can be skipped when performing the diagnosis only to erase the DTC.)
  3. Select Mode 4 with Generic Scan Tool (GST).
scientia non olet · About LEMON Manuals