Daytime Light Operation

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

With the engine running, the lighting switch in the OFF or 1ST position and parking brake released, power is supplied

through daytime light control unit terminal 6
to front combination lamp LH terminal 3
through front combination lamp LH terminal 4
to daytime light control unit terminal 7, and
through daytime light control unit terminal 8
to front combination lamp RH terminal 3.

Ground is supplied

to front combination lamp RH terminal 4
through grounds E9, E15 and E24.

Because the high beam headlamps are now wired in series, they operate at half illumination.