LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 414 (Engine Control System - DTC) >> DTC P1274, P1284: A/F Sensor >> Diagnostic Procedure >> 3. Clear The Self-Learning Data >> With CONSULT-II
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine and warm it up to normal operating temperature.
  2. Select "SELF-LEARNING CONT" in "WORK SUPPORT" mode with CONSULT-II.
  3. Clear the self-learning control coefficient by touching "CLEAR".
  4. Run engine for at least 10 minutes at idle speed.

    Is the 1st trip DTC P0172 or P0175 detected? 

    Is it difficult to start engine? 

Fig 1: CONSULT-II Display Screen
G00877523Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals