CONSULT-II Start Procedure

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Turn off the ignition switch.
Connect CONSULT-II and CONSULT-II CONVERTER to the data link connector.

Fig 1: Connecting Consult-II And Consult-II Converter To Data Link Connector (Example Model)
Courtesy of NISSAN MOTOR CO., U.S.A.
Turn on the ignition switch.
Touch "START (NISSAN BASED VECL)" or "System Shortcut" (eg: Engine) on the screen.

Fig 2: Displaying Consult-II Screen
Courtesy of NISSAN MOTOR CO., U.S.A.