CONSULT-II Function: Notes
WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
The following functions are executed by combining data received and command transmitted via the communication line from the driver seat control unit.
CONSULT-II FUNCTION
| CONSULT-II diagnosis items | Inspection item, self-diagnosis mode | Content | |||
|---|---|---|---|---|---|
| AUTO DRIVE POSITIONER | WORK SUPPORT(1) | Changes the setting for each function. | |||
| SELF-DIAG RESULTS | Check the self-diagnosis results. | ||||
| DATA MONITOR | CAN diagnosis support monitor | Displays CAN communication system diagnosis, disabled communication status of each unit communicated with driver seat control unit. | |||
| Selection from menu | Displays the input data to driver seat control unit and automatic drive positioner control unit on real-time basis. | ||||
| ACTIVE TEST | Gives a drive signal to a load to check the operation. | ||||
| DRIVER SEAT CONTROL UNIT PART NUMBER | Displays driver seat control unit part No. | ||||
| BCM(2) | DATA MONITOR | Selection from menu | Displays the input data to BCM on real-time basis | ||
|
|||||
|
|||||