Control Device Removal and Installation: Removal
WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect lower lever of control device and control rod.
- Remove knob cover below selector lever knob downward.
- Pull lock pin out of selector lever knob.
- Remove selector lever knob.
- Remove console finisher.
- Refer to "COMPONENT PARTS DRAWING ".
- Remove center console.
- Refer to "COMPONENT PARTS DRAWING ".
- Remove key interlock cable from control device.
- Refer to "REMOVAL AND INSTALLATION ".
- Disconnect A/T device harness connector.
- Remove control device assembly.