LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1565 (General Information) >> Consult-II Checking System >> Function and System Application
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Function and System Application

WARNING: This page is about a different car, the 2005 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
FUNCTION AND SYSTEM APPLICATION

Diagnostic test mode Function Engine A/T Air bag ABS ABS (Including VDC) Air Pressure Monitor
Work support This mode enables a technician to adjust some devices faster and more accurately by following the indications on CONSULT-II. X - - - X X
DTC work support Select the operating condition to confirm Diagnosis Trouble Codes. - X - - - -
Self-diagnostic results Self-diagnostic results can be read and erased quickly. X X X X X X
Trouble diagnostic record Current self-diagnostic results and all trouble diagnostic records previously stored can be read. - - X - - -
ECU discriminated No. Classification number of a replacement ECU can be read to prevent an incorrect ECU from being installed. - - X - - -
Data monitor Input/Output data in the ECU (ECM) can be read. X X - X X X
Data monitor (Spec.) The specified values will be displayed when an OK/NG judgment is difficult for the DATA MONITOR items by Bar Chart and Line Graph. X - - - - -
Active test Diagnostic Test Mode in which CONSULT-II drives some actuators apart from the ECUs and also shifts some parameters in a specified range. X - - X X -
SRT & DTC confirmation The results of SRT (System Readiness Test) and the self-diagnosis status/result can be confirmed. X X - - - -
ECU (ECM) part number ECU (ECM) part number can be read. X X - X X X

X: Applicable