CAN Communication Line Check: Notes

WARNING: This page is about a different car, the 2006 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

CHECK MONITOR DESCRIPTION

Start display control unit self-diagnosis. Refer to , "SELF-DIAGNOSIS MODE (DCU)

Select "CAN DIAG SUPPORT MONITOR". Refer to , "CAN DIAG SUPPORT MONITOR "

CAN COMMUNICATION ITEM CHART

Item	content		Error counter
Item	Normal condition	Error (Example)	Error counter
CAN_COMM	OK	NG	0-50
CAN_CIRC_1	OK	UNKWN	0-50
CAN_CIRC_2	OK	UNKWN	0-50
CAN_CIRC_3	OK	UNKWN	0-50
CAN_CIRC_4	OK	UNKWN	0-50
CAN_CIRC_5	OK	UNKWN	0-50
CAN_CIRC_6	OK	UNKWN	0-50
CAN_CIRC_7	OK	UNKWN	0-50
CAN_CIRC_8	OK	UNKWN	0-50
CAN_CIRC_9	OK	UNKWN	0-50

Fig 1: Scan Tool Display - CAN DIAG Support Monitor

Courtesy of NISSAN MOTOR CO., U.S.A.

Record each item display description (OK/NG/UKNWN) displayed on the following CAN DIAG SUPPORT MONITOR Check Sheet.