LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1803 (Body Control System (Sedan)) >> BCM (Body Control Module) >> CONSULT-II Function (BCM) >> Consult-II Basic Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Consult-II Basic Operation

WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
  1. With the ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to the data link connector, then turn the ignition switch ON.
    2. Fig 1: Identifying Data Link Connector Location
    G04124046Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "START (NISSAN BASED VHCL)".
    3. Fig 2: Consult-II Display Screen
    G04151184Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Touch "BCM" on "SELECT SYSTEM" screen.

    If "BCM" is not indicated, refer to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".

    Fig 3: Consult-II SELECT SYSTEM Display Screen
    G04083859Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Select the desired part to be diagnosed on the "SELECT TEST ITEM" screen.
    Fig 4: CONSULT II Display -Select Test Item
    G04136300Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals