Terminals and Reference Values for Automatic Drive Positioner Control Unit
WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS AND REFERENCE VALUES FOR AUTOMATIC DRIVE POSITIONER CONTROL UNIT
| Terminal | Wire Color | Item | Condition | Voltage (V) (Approx.) |
|---|---|---|---|---|
| 2 | L/R | Changeover switch RH signal | Changeover switch in RH position | 0 |
| Other than above | 5 | |||
| 3 | Y/B | Mirror switch UP signal | Mirror switch in UP position | 0 |
| Other than above | 5 | |||
| 4 | G/B | Mirror switch LEFT signal | Mirror switch in LEFT position | 0 |
| Other than above | 5 | |||
| 5 | R/B | Mirror sensor (RH vertical) signal | Mirror motor RH is UP or DOWN operation | Changes between 3.5 (close to peak) 0.5 (close to valley) |
| 6 | L/Y | Mirror sensor (LH vertical) signal | Mirror motor LH is UP or DOWN operation | Changes between 3.5 (close to peak) 0.5 (close to valley) |
| 8 | W/R | Pedal sensor input signal | Pedal position front end | 0.5 |
| Pedal position rear end | 4.5 | |||
| 9 | LG/B | Seat memory switch 1 signal | Memory switch 1 ON | 0 |
| Memory switch 1 OFF | 5 | |||
| 10 | R | UART LINE (TX) | Pedal adjusting switch ON (FORWARD or BACKWARD operation) | |
| 12 | GR/L | Seat memory switch indicator - 1 signal | Memory switch 1 ON | 1 |
| Memory switch 1 OFF | Battery voltage | |||
| 13 | Y | Seat memory switch indicator - 2 signal | Memory switch 2 ON | 1 |
| Memory switch 2 OFF | Battery voltage | |||
| 14 | GR/R | Mirror motor RH UP signal | Mirror motor RH UP operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| 15 | V/W | Mirror motor RH LEFT signal | Mirror motor RH LEFT operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| 16 | O | Mirror motor LH DOWN signal | Mirror motor LH DOWN operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| Mirror motor LH RIGHT signal | Mirror motor LH RIGHT operation | 1.7 - Battery voltage | ||
| Other than above | 0 | |||
| 18 | Y/R | Changeover switch LH signal | Changeover switch in LH position | 0 |
| Other than above | 5 | |||
| 19 | L/B | Mirror switch DOWN signal | Mirror switch in DOWN position | 0 |
| Other than above | 5 | |||
| 20 | V | Mirror switch RIGHT signal | Mirror switch in RIGHT position | 0 |
| Other than above | 5 | |||
| 21 | L/W | Mirror sensor (RH horizontal) signal | Mirror motor RH is LEFT or RIGHT operation | Changes between 3.5 (close to left edge) 0.5 (close to right edge) |
| 22 | G | Mirror sensor (LH horizontal) signal | Mirror motor LH is LEFT or RIGHT operation | Changes between 3.5 (close to right edge) 0.5 (close to left edge) |
| 24 | G/W | Seat set switch signal | Set switch 1 ON | 0 |
| Set switch 1 OFF | 5 | |||
| 25 | P/L | Seat memory switch 2 signal | Memory switch 2 ON | 0 |
| Memory switch 2 OFF | 5 | |||
| 26 | R/W | UART LINE (RX) | Pedal adjusting switch ON (FORWARD or BACKWARD operation) | |
| 30 | SB | Mirror motor RH DOWN signal | Mirror motor RH DOWN operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| Mirror motor RH RIGHT signal | Mirror motor RH RIGHT operation | 1.7 - Battery voltage | ||
| Other than above | 0 | |||
| 31 | R/Y | Mirror motor LH UP signal | Mirror motor LH UP operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| 32 | BR | Mirror motor LH LEFT signal | Mirror motor LH LEFT operation | 1.7 - Battery voltage |
| Other than above | 0 | |||
| 33 | W/L | Sensor power supply | - | 5 |
| 34 | BR/Y | Battery power supply | - | Battery voltage |
| 37 | G | Pedal adjusting motor FORWARD signal | Pedal adjusting motor FORWARD operation (Motor operated) | Battery voltage |
| Other than above | 0 | |||
| 39 | W | Battery power supply | - | Battery voltage |
| 40 | B/W | Ground | - | 0 |
| 41 | V | Sensor ground | - | 0 |
| 45 | G/O | Pedal adjusting motor BACKWARD signal | Pedal adjusting motor BACKWARD operation (Motor operated) | Battery voltage |
| Other than above | 0 | |||
| 48 | B | Ground | - | 0 |