Generator Specifications
WARNING: This page is about a different car, the 2003 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
GENERATOR SPECIFICATIONS
| Application |
Specification |
| Generator Model |
A3TG0191, MITSUBISHI |
| Nominal Rating |
12 Volts, 110 Amps |
| Ground Polarity |
Negative |
| Minimum RPM Under No Load (With 13.5 Volts Applied) |
1000 RPM |
| Hot Output Current (With 13.5 Volts Applied) |
| At 1300 RPM |
37 Amps |
| At 2500 RPM |
92 Amps |
| At 5000 RPM |
103 Amps |
| Regulated Output Voltage |
14.1-14.7 Volts |
| Minimum Brush Length |
.197 in. (5.00 mm) |
| Brush Spring Pressure |
17.62-21.94 ozs. (4.9-6.1 N) |
| Slip Ring Minimum Outer Diameter |
.870 in. (22.1 mm) |
| Rotor (Field Coil) Resistance |
1.7-2.1 Ohms |
GENERATOR SPECIFICATIONS
| Application |
Specification |
| Generator Model |
A3TB4291, MITSUBISHI |
| Nominal Rating |
12 Volts, 110 Amps |
| Ground Polarity |
Negative |
| Minimum RPM Under No Load (With 13.5 Volts Applied) |
1300 RPM |
| Hot Output Current (With 13.5 Volts Applied) |
| At 1300 RPM |
35 Amps |
| At 2500 RPM |
91 Amps |
| At 5000 RPM |
110 Amps |
| Regulated Output Voltage |
14.1-14.7 Volts |
| Minimum Brush Length |
.197 in. (5.00 mm) |
| Brush Spring Pressure |
17.28-21.51 ozs. (4.8-6.0 N) |
| Slip Ring Minimum Outer Diameter |
.870 in. (22.1 mm) |
| Rotor (Field Coil) Resistance |
1.7-2.1 Ohms |