April 5, 2026: LEMON Manuals is launched! Read the announcement.

1. Check Overall Function-I

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-II

Turn ignition switch ON.
Select "BRAKE SW1" in "DATA MONITOR" mode with CONSULT-II.

Fig 1: CONSULT-II Display Screen
Courtesy of NISSAN MOTOR CO., U.S.A.
Check "BRAKE SW1" indication under the following conditions.

Fig 2: "DATA MONITOR" Parameters
Courtesy of NISSAN MOTOR CO., U.S.A.

Without CONSULT-II

Turn ignition switch ON.
Check voltage between ECM terminal 108 and ground under the following conditions.

Fig 3: Checking Overall Function-I
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Overall Function-I Test Parameters
Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK: GO TO 2.

NG: GO TO 3 .