5. Check PNP Switch Input Signal Circuit For Open And Short-I
WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch OFF.
- Disconnect TCM harness connector.
- Disconnect combination meter harness connector.
- Check harness continuity between TCM terminal 48 and combination meter terminal 15.
Refer to Wiring Diagram.
- Continuity should exist .
- Also check harness for short to ground and short to power.
OK or NG
OK: GO TO 7
NG: GO TO 6.