LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 408 (Power Door Locks) >> Power Door Lock System >> Work Flow
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Flow

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the symptom and customer's requests.
  2. Understand the outline of system. Refer to SYSTEM DESCRIPTION  .
  3. Perform the preliminary check. Refer to PRELIMINARY CHECK  .
  4. Perform the communication inspection. If CONSULT-II is used, refer to IVMS COMMUNICATION INSPECTION  . If CONSULT-II is not used, refer to COMMUNICATION DIAGNOSIS  . Is the communication diagnosis result OK?
    1. OK: GO TO step 7
    2. NG: GO TO step 5
  5. Repair or replace depending on the diagnosis result.
  6. Perform the communication diagnosis again. If CONSULT-II is used, refer to IVMS COMMUNICATION INSPECTION  . If CONSULT-II is not used, refer to COMMUNICATION DIAGNOSIS  . Is communication diagnosis result OK?
    1. OK: GO TO step 7
    2. NG: GO TO step 5
  7. Perform the self-diagnosis. If CONSULT-II is used, refer to SELF-DIAGNOSIS RESULTS  . If CONSULT-II is not used, refer to POWER DOOR LOCK SYSTEM SELF-DIAGNOSIS  . Is self-diagnosis result OK?
    1. OK: GO TO step 11
    2. NG: GO TO step 8
  8. Repair or replace depending on the diagnosis result.
  9. Perform the self-diagnosis again. If CONSULT-II is used, refer to SELF-DIAGNOSIS RESULTS  If CONSULT-II is not used, refer to POWER DOOR LOCK SYSTEM SELF-DIAGNOSIS  . Is self-diagnosis result OK?
    1. OK: GO TO step 11
    2. NG: GO TO step 8
  10. Referring to trouble diagnosis chart, repair or replace the cause of the incident. Refer to SYMPTOM CHART  .
  11. Does power door lock system operate normally? If it operates normally, GO TO step 12. If NG, GO TO step 10.
    1. YES: GO TO step 12
    2. O: GO TO step 10
  12. Inspection END.