Diagnostic Procedure: Notes

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CAN COMMUNICATION CIRCUIT
With CONSULT-II
1. Turn ignition switch ON and start engine.
2. Select DATA MONITOR mode for TRANSMISSION with CONSULT-II.
3. The CAN COMM CIRCUIT is detected.
  
  Fig 1: CONSULT-II CAN COMM CIRCUIT Display
  Courtesy of NISSAN MOTOR CO., U.S.A.
  
  YES or NO
  1. YES: Print out CONSULT-II screen, GO TO 2.
  2. NO: INSPECTION END
CHECK CAN COMMUNICATION SIGNALS
With CONSULT-II
1. Turn ignition switch to ON position and start engine.
2. Select CAN DIAG SUPPORT MNTR in DATA MONITOR mode for TRANSMISSION with CONSULT-II.
  Print out CONSULT-II screen, go to PRECAUTIONS WHEN USING CONSULT-II .