Fuel Pump: Installation

To install, reverse removal procedure. Ensuring that fuel filter and pump tabs are properly aligned. A audible click should be heard when filter and pump are engaged. Secure harness connector. Replace fuel pressure regulator "O" ring. Match protrusion on regulator and fuel pump so that retaining clip notch aligns correctly. See Fig 3.

Fig 1: Identifying Fuel Level Sensor Unit, Fuel Pump & Fuel Filter

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Removing & Installing Fuel Pump (1 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Removing & Installing Fuel Pump (2 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.