Front Heater And Cooling Unit Assembly: Installation
WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
Installation is in the reverse order of removal.
CAUTION:
- Replace the O-ring of the low-pressure flexible hose and high-pressure flexible hose with a new one, and apply compressor oil to it when installing it.
- After charging the refrigerant, check for leaks.
NOTE:
- Fill the engine cooling system with the specified coolant mixture. Refer to "REFILLING ENGINE COOLANT ".
- Recharge the A/C system. Refer to "EVACUATING SYSTEM AND CHARGING REFRIGERANT ".