CONSULT-II Start Procedure

WARNING: This page is about a different car, the 2005 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Turning Ignition switch off when performing CAN diagnosis could cause CAN memory to be erased.

Connect CONSULT-II and CONSULT-II CONVERTER to the data link connector.

Fig 1: Connecting CONSULT-II Converter
Courtesy of NISSAN MOTOR CO., U.S.A.
If necessary turn on the ignition switch.
Touch "START (NISSAN BASED VECL)" or "System Shortcut" (eg: Engine) on the screen.

Fig 2: CONSULT-II DISPLAY
Courtesy of NISSAN MOTOR CO., U.S.A.