Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.

Set key interlock cable to key cylinder and install holder.
Turn ignition key to lock position.
Set selector lever to "P" position.

Fig 1: Installing Lock Plate And Key Interlock Cable
Courtesy of NISSAN MOTOR CO., U.S.A.
Insert interlock rod into adjuster holder.
Install casing cap to bracket.
Move slider in order to secure adjuster holder to interlock rod.

Fig 2: Installing Interlock Rod Into Adjuster Holder
Courtesy of NISSAN MOTOR CO., U.S.A.