4X4 Model
WARNING: This page is about a different car, the 2005 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS - 4X4 MODEL
| Applied model | VQ40DE | |||||
|---|---|---|---|---|---|---|
| MT | A/T | |||||
| Front | Propeller shaft model | 2F1310 | ||||
| Number of joints | 2 | |||||
| Coupling method with front final drive | Flange type | |||||
| Coupling method with transfer | Flange type | |||||
| Shaft length (Spider to spider) | 696 mm (27.40 in) | |||||
| Shaft outer diameter | 63.5 mm (2.5 in) | |||||
| Journal axial play | 0.02 mm (0.0008 in) or less | |||||
| Propeller shaft runout limit | 0.6 mm (0.024 in) or less | |||||
| Propeller shaft joint flex effort | 1.96 N.m (0.20 kg-m, 17 in-lb) or less | |||||
| Rear | Propeller shaft model | 2S1330 (aluminum tube) | ||||
| Number of joints | 2 | |||||
| Coupling method with rear final drive | Flange type | |||||
| Coupling method with transmission | Sleeve type | |||||
| Shaft length (Spider to spider) | 1266.8 mm (49.87 in) | 1266.8 mm (49.87 in) | 1280.8 mm (50.43 in)(1) | |||
| Shaft outer diameter | 102.5 mm (4.04 in) | |||||
| Journal axial play | 0.02 mm (0.0008 in) or less | |||||
| Propeller shaft runout limit | 1.02 mm (0.0402 in) or less | |||||
| Propeller shaft joint flex effort | 2.26 N.m (0.23 kg-m, 20 in-lb) or less | |||||
|
||||||