Special Service Tools
WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
SPECIAL SERVICE TOOLS DESCRIPTION
| Tool number (Kent-Moore No.) Tool name |
Description | |
|---|---|---|
| KV10111100 (J-37228) Seal cutter: |
Removing steel oil pan and rear timing chain case | |
| - (J-44626) Air fuel sensor Socket: |
Loosening or tightening air fuel ratio A/F sensor a: 22 mm (0.87 in) |
|
| EG15050500 (J-45402) Compression gauge adapter: |
Inspecting compression pressure | |
| KV10116200 (J-26336-A) Valve spring compressor 1. KV10115900 (J-26336-20) Attachment 2. KV10109220 ( - ) Adapter: |
Disassembling valve mechanism Part (1) is a component of KV10116200 (J-26336-A), but part (2) is not. |
|
| KV10112100 (BT-8653-A) Angle wrench: |
Tightening bolts for cylinder head, main bearing cap and connecting rod cap | |
| KV10107902 (J-38959) Valve oil seal puller: |
Removing valve oil seal | |
| KV10115600 (J-38958) Valve oil seal drift: |
Installing valve oil seal Use side A. a: 20 (0.79) dia. d: 8 (0.31) dia. b: 13 (0.51) dia. e: 10.7 (0.421) dia. c: 10.3 (0.406) dia. f: 5 (0.20) dia. Unit: mm (in) |
|
| EM03470000 (J-8037) Piston ring compressor: |
Installing piston assembly into cylinder bore | |
| ST16610001 (J-23907) Pilot bushing puller: |
Removing crankshaft pilot bushing | |
| WS39930000 ( - ) Tube presser: |
Pressing the tube of liquid gasket | |
| - (J-45476) Ring gear stopper: |
Removing and installing crankshaft pulley | |
| 16441 6N210 (J-45488) Quick connector release: |
Removing fuel tube quick connectors in engine room (Available in SEC. 164 of PARTS CATALOG: Part No. 16441 6N210) |
|
| - (J-46535) Drive belt tension releaser: |
Releasing drive belt tension |