Input/Output Signal of TCM

WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

INPUT/OUTPUT SIGNAL OF TCM CHART

Control item

Line pressure control

Vehicle speed control

Shift control

Lock-up control

Engine brake control

Fail-safe function (⁽³⁾)

Self-diagnostics function

Input

Accelerator pedal position signal (⁽⁴⁾)

Vehicle speed sensor A/T (revolution sensor)

Vehicle speed sensor MTR (⁽¹⁾) (⁽⁴⁾)

Closed throttle position signal (⁽⁴⁾)

(⁽²⁾) X

Wide open throttle position signal (⁽⁴⁾)

(⁽²⁾) X

Turbine revolution sensor 1

Turbine revolution sensor 2 (for 4th speed only)

Engine speed signals (⁽⁴⁾)

PNP switch

A/T fluid temperature sensors 1, 2

ASCD

Operation signal (⁽⁴⁾)

Overdrive cancel signal (⁽⁴⁾)

TCM power supply voltage signal

Output

Direct clutch solenoid (ATF pressure switch 5)

Input clutch solenoid (ATF pressure switch 3)

High & low reverse clutch solenoid (ATF pressure switch 6)

Front brake solenoid (ATF pressure switch 1)

Low coast brake solenoid (ATF pressure switch 2)

Line pressure solenoid

TCC solenoid

Self-diagnostics table (⁽⁴⁾)

Starter relay

⁽¹⁾	Spare for vehicle speed sensor. A/T (revolution sensor)

⁽²⁾	Spare for accelerator pedal position signal

⁽³⁾	If these input and output signals are different, the TCM triggers the fail-safe function.

⁽⁴⁾	CAN communications