Terminals and Reference Values for Automatic Drive Positioner Control Unit

WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

AUTOMATIC DRIVE POSITIONER CONTROL UNIT - REFERENCE TABLE

TERMINAL	WIRE COLOR	ITEM	CONDITION	VOLTAGE (V) (Approx.)
1	Y/G	Tilt switch UP signal	Tilt switch turned to upward	0
1	Y/G	Tilt switch UP signal	Other than above	5
7	OR/L	Tilt sensor signal	Tilt position, top	2
7	OR/L	Tilt sensor signal	Tilt position, bottom	4
11	P/L	Telescopic switch Front signal	Telescopic switch turned to forward	0
11	P/L	Telescopic switch Front signal	Other than above	5
17	LG/B	Tilt switch DOWN signal	Tilt switch turned to downward	0
17	LG/B	Tilt switch DOWN signal	Other than above	5
23	R/Y	Telescopic sensor input	Telescopic position, top	1
23	R/Y	Telescopic sensor input	Telescopic position, bottom	4
27	G/W	Telescopic switch Back signal	Telescopic switch turned to backward	0
27	G/W	Telescopic switch Back signal	Other than above	5
33	W/L	Sensor power supply	-	5
34	G/Y	Power source (Fuse)	-	Battery voltage
35	G/Y	Tilt motor UP signal	Tilt switch turned to upward	Battery voltage
35	G/Y	Tilt motor UP signal	Other than above	0
36	R	Telescopic motor FORWARD signal	Telescopic switch turned to forward	Battery voltage
36	R	Telescopic motor FORWARD signal	Other than above	0
39	W	Battery power supply	-	Battery voltage
40	B	Ground (Signal)	-	0
41	Y	Sensor ground	-	0
42	G/W	Tilt motor Down signal	Tilt switch turned to downward	Battery voltage
42	G/W	Tilt motor Down signal	Other than above	0
44	G	Telescopic motor back signal	Telescopic switch turned to back ward	Battery voltage
44	G	Telescopic motor back signal	Other than above	0
48	B	Ground (Power)	-	0