Commercial Service Tools
WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
COMMERCIAL SERVICE TOOLS SPECIFICATIONS
| (Kent-Moore No.) Tool name |
Description | |
|---|---|---|
| (-) Power tool |
Loosening nuts and bolts | |
| (-) TORX socket |
Removing and installing flywheel Size: T55 |
|
| (J-24239-01) Cylinder head bolt wrench |
Loosening and tightening cylinder head bolt, and used with angle wrench [SST: KV10112100(BT-8653-A)] a: 13 (0.51) dia . b: 12 (0.47) c: 10 (0.39) Unit: mm (in) |
|
| (-) Spark plug wrench |
Removing and installing spark plug | |
| (--) Valve seat cutter set |
Finishing valve seat dimensions | |
| (-) Piston ring expander |
Removing and installing piston ring | |
| (-) Valve guide drift |
Removing and installing valve guide Intake and Exhaust: a: 9.5 mm (0.374 in) dia . b: 5.5 mm (0.217 in) dia . |
|
| (-) Valve guide reamer |
|
|
| (J-43897-18) (J-43897-12) Oxygen sensor thread cleaner |
Reconditioning the exhaust system threads before installing a new heated oxygen sensor (Use with anti-seize lubricant shown below.) a: J-43897-18 [18 mm (0.71 in) dia.] for zirconia heated oxygen sensor b: J-43897-12 [12 mm (0.47 in) dia.] for Titania heated oxygen sensor |
|
| (-) Anti-seize lubricant (Permatex 133AR or equivalent meeting MIL specification MIL-A-907) |
Lubricating oxygen sensor thread cleaning tool when reconditioning exhaust system threads | |