LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1913 (Engine Lubrication System) >> Engine Oil >> Changing Engine Oil
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Changing Engine Oil

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Be careful not to burn yourself, as the engine oil may be hot.
  • Prolonged and repeated contact with used engine oil may cause skin cancer; try to avoid direct skin contact with used oil. If skin contact is made, wash thoroughly with soap or hand cleaner as soon as possible.
  1. Park the vehicle on a flat and level surface, then start the engine to warm up the oil.
  2. Check for oil leaks from the engine.
  3. Stop the engine and wait for 10 minutes.
  4. Remove the drain plug and oil filler cap.
  5. Drain the engine oil.
  6. Install the drain plug.
    CAUTION:
    • Be sure to clean drain plug and install with new washer.

      Oil pan drain plug : 29 - 39 N.m (3.0 - 4.0 kg-m, 22 - 29 ft-lb)

    • Refill the engine with the specified new engine oil.

    Oil Capacity (Approximate) 

    OIL CAPACITY (APPROXIMATE)

    Drain and refill With oil filter change 4.2 l (4 1/2 US qt, 3 3/4 Imp qt)
    Without oil filter change 4.0 l (4 1/4 US qt, 3 1/2 Imp qt)
    Dry engine (engine overhaul) 4.6 l (4 7/8 US qt, 4 Imp qt)
    CAUTION:
    • The refill capacity depends on the oil temperature and drain time. Use these specifications for reference only.
    • Always use the dipstick to determine when the proper amount of oil is in the engine.
  7. Warm up the engine and check the area around the drain plug and oil filter for oil leaks.
  8. Stop the engine and wait for 10 minutes.
  9. Check the oil level. Refer to "OIL LEVEL  ".