Steering Switch Check
WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- AV SWITCH SELF-DIAGNOSIS FUNCTION CHECK
- Start AV switch self-diagnosis function. Refer to "AV SWITCH SELF-DIAGNOSIS FUNCTION ".
- Operate steering switch.
Does steering switch operate normally?
YES : Inspection End.
NO : GO TO 2.
- CHECK HARNESS
- Turn ignition switch OFF.
- Disconnect AV switch connector M98 and spiral cable connector M30.
- Check continuity between spiral cable harness connector terminal and AV switch harness connector terminal.CONTINUITY CONDITIONS
Terminals Continuity Spiral cable AV switch Connector Terminal Connector Terminal M30 32 M98 13 Yes 31 14 24 12 - Check continuity between AV switch and ground.CONTINUITY CONDITIONS
Terminals Continuity AV switch - Connector Terminal M98 12 Ground No 13 14
OK or NG
OK : GO TO 3.
NG : Repair harness.
- SPIRAL CABLE CHECK
- Disconnect spiral cable connectors M30 and M102.
- Check continuity between spiral cable terminals.CONTINUITY CONDITIONS
Terminals Continuity Spiral cable Terminal Terminal 32 16 Yes 31 17 24 20
OK or NG
OK : GO TO 4.
NG : Replace spiral cable. Refer to SPIRAL CABLE .
- CHECK STEERING SWITCH RESISTANCE
Check resistance between steering switch terminals.
RESISTANCE SPECIFICATIONSTerminal Signal name Condition Resistance (Ω) (Approx.) 16 17 Seek (down) Depress (station) down switch. 165 Power Depress power switch. 0 Volume (down) Depress volume down switch. 652 20 17 Seek (up) Depress (station) up switch. 165 Mode Depress mode switch. 0 Volume (up) Depress volume up switch. 652 OK or NG
OK : Inspection End.
NG : Replace steering switch. Refer to "STEERING WHEEL AUDIO CONTROL SWITCHES ".