LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2016 (Engine Cooling System) >> Engine Coolant >> System Check >> Checking Reservoir Cap
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Checking Reservoir Cap

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check reservoir cap relief pressure using Tool.

    Tool number : EG17650301 (J-33984-A) 

    Standard: 78 - 98 kPa (0.8 - 1.0 kg/cm 2  , 11 - 14 psi) 

    Limit: 59 kPa (0.6 kg/cm 2  , 9 psi) 

    • When connecting the reservoir cap to the tester, apply water or coolant to the cap seal surface.
    • Replace the reservoir cap if there is an abnormality in the negative-pressure valve, or if the open-valve pressure is outside of the standard values.
      Fig 1: Checking Radiator Cap Relief Pressure Using Tool
      G04894350