LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2290 (2004.5 - Engine Control System - Component Testing - Sedan) >> ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ASCD Clutch Switch

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.
    CLUTCH PEDAL CONDITION AND CONTINUITY

    Condition Continuity
    When clutch pedal is fully released. Should exist.
    When clutch pedal is depressed. Should not exist.

    If NG, adjust ASCD clutch switch installation, refer to CLUTCH PEDAL and perform step  3 again.

    Fig 1: Checking Harness Continuity Between ASCD Clutch Switch Terminals 1 & 2
    G03325569Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals