LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 368 (Front Suspension System) >> Coil Spring And Shock Absorber >> Disassembly And Assembly >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembly And Assembly: Assembly

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. When installing coil spring on shock absorber, it must be positioned as shown.
    Fig 1: Aligning Coil Spring To Seat
    G00728289Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Install upper spring seat as shown in line with lower absorber shock mount and step in lower seat.
    • The step in the shock absorber assembly lower seat faces outside of vehicle.
  3. Tighten the shock absorber rod lock nut to specification. Refer to Figure.
    • Use a new shock absorber rod lock nut for assembly.
Fig 2: Aligning Upper Spring Seat In Line With Lower Absorber Shock Mount
G00728290Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals