LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 372 (Automatic Transmission Shift Interlock System) >> Shift Control System >> Control Device Removal And Installation >> Removal >> Floor Shift
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Floor Shift

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the select lever knob.
  2. Remove console finisher.
    • Refer to A/T CONSOLE FINISHER in GAUGES & INSTRUMENT PANEL - TITAN article in ACCESSORIES & BODY, CAB.
  3. Remove center console.
  4. Disconnect A/T device harness connector.
  5. Disconnect selector control cable.
  6. Remove control device assembly.
    Fig 1: Removing The Select Lever Knob
    G00726740Courtesy of NISSAN MOTOR CO., U.S.A.