DTC Confirmation Test
WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If DTC confirmation test has been previously performed, always turn ignition off and wait at least 10 seconds before performing next DTC confirmation test.
NOTE:
Before proceeding, ensure battery voltage is more than 10 volts at idle.
- Turn ignition on.
- Select DATA MONITOR mode with Scan Tool.
- Turn ignition off and wait at least 10 seconds.
- Turn ignition on.
- Repeat steps 3 and 4, 32 times.
- If first DTC is detected, go to DIAGNOSTIC PROCEDURE .