On-Board Diagnostic II System Check: Notes
WARNING: This page is about a different car, the 2002 Isuzu Rodeo Sport, 2002 Isuzu Rodeo, 2002 Isuzu Axiom, and 2002 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Use of TECH 2 scan tool or equivalent is required to perform On-Board Diagnostic II System Check.
NOTE:
To identify component terminals and wire colors referenced in testing, see WIRING DIAGRAMS
article. Perform all voltage tests with a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm impedance, unless stated otherwise in test procedure.