Installation Of Steering Column Assembly
WARNING: This page is about a different car, the 2003 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
- Installation procedure should be used with the steering lock unlocked.
- Tack upper portion of the lower joint on the steering column assembly, and install steering column assembly to vehicle with mounting nuts.
- Install pinch bolt on upper portion of lower joint.
- Install clamp and connector.
- Install the meter control unit to the steering column assembly. Refer to "INSTRUMENT PANEL " article.
- Install key interlock cable to steering column assembly. Refer to "AUTOMATIC TRANSAXLE " article.
- Install spiral cable. Refer to "AIR BAG RESTRAINT SYSTEMS " article.
- Install instrument lower driver panel. Refer to "INSTRUMENT PANEL " article.
- Install steering wheel and column cover. Refer to "REMOVAL AND INSTALLATION ".
CAUTION:
After installation, turn steering wheel. Be sure with check if besides steering wheel turns smoothly, following items are caused, prying, scratch, noise, excessive steering force.