Set Operation

To activate the ASCD, all of following conditions must exist

• ASCD control unit receives ON.OFF switch ON signal.
• Power supply to ASCD control unit terminal 8 [Brake and clutch pedal is released (M/T), and brake pedal is released and A/T selector lever is in other than P and N position (A/T)].
• Vehicle speed is between 40 km/h (25 MPH) and 144 km/h (89 MPH). (Signal from combination meter.)

When the COAST/SET switch is depressed, ground is supplied

• to ASCD control unit terminal 11,
• from ASCD steering switch terminal 13.

Then ASCD motor actuator is activated to control throttle wire and ASCD control unit supplies ground

• to combination meter terminal 37 to illuminate SET indicator
• from ASCD control unit terminal 18.