LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Maxima SE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTC >> DTC P0101: MAF Sensor >> DTC Confirmation Procedure >> Procedure For Malfunction A >> With CONSULT-II
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and warm it up to normal operating temperature.
  4. Run engine for at least 10 seconds at idle speed.
  5. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
Fig 1: CONSULT-II Display Screen
G00875870Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals