CONSULT-II Function: Notes
CAUTION:
- When the self-diagnosis, data monitor, or active test functions are being executed, EBD and ABS control is disabled.
- When using CONSULT-II to conduct ABS control unit self-diagnosis, active test, work support, etc., first stop engine, connect the CONSULT-II, and select "ABS".
- CONSULT-II self-diagnosis results are displayed without regard to occurrence timing. In some cases later ones (timing value is small) appear on the next screen.
- When an error is shown by the CONSULT-II SELF-DIAG RESULTS and CONSULT-II is used to conduct an active test, an engine system malfunction may be shown, but restarting the engine will return the status to normal.