Without CONSULT-II

1. Run engine at about 2,000 RPM for about 2 minutes under no load.
2. Rev engine (2,000 to 3,000 RPM) two or three times under no load, then run engine at idle speed for about 1 minute.
3. Check idle speed.
   1. M/T: 625 +/- 50 RPM 
   2. 4-speed A/T: 700 +/- 50 RPM (in P or N position) 
   3. 5-speed A/T: 675 +/- 50 RPM (in P or N position) 

OK or NG 

1. OK: GO TO 10 .
2. NG: GO TO 4.