ASCD Brake Switch

1. Turn ignition switch OFF.
2. Disconnect ASCD brake switch harness connector.
3. Check continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
   Fig 1: Continuity Specification Chart

   Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Checking Continuity Between ASCD Brake Switch Terminals 1 And 2

Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, adjust ASCD brake switch installation, refer to BRAKE PEDAL FREE PLAY , and perform step 3 again.