Diagnostic Procedure

CHECK OVERALL FUNCTION
Check ASCD indicator under the following conditions.

Fig 1: Checking Overall Function Of ASCD Indicator Lamp
Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG
1. OK INSPECTION END
2. NG GO TO 2.
CHECK DTC
Make sure that DTC U1000 or U1001 is not displayed.

OK or NG
1. OK GO TO 3.
2. NG Perform "DIAGNOSTIC PROCEDURE " for DTC U1000 or U1001 .
CHECK COMBINATION METER OPERATION
Check that combination meter operates normally.

OK or NG
1. OK GO TO 4.
2. NG Check combination meter circuit. Refer to METERS AND GAUGES .
CHECK INTERMITTENT INCIDENT
Refer to "TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT " .
1. INSPECTION END