With CONSULT-II

Turn ignition switch ON.
Select "DATA MONITOR" mode with CONSULT-II.
Maintain the following conditions for at least 20 consecutive seconds.

Fig 1: Data Monitor Display
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: ENG Speed Chart (1 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: ENG Speed Chart (2 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.
If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE " .