With Consult-II

Turn ignition switch ON.
Select "DATA MONITOR" mode with CONSULT-II.
Maintain the following conditions for at least 10 consecutive seconds.

Fig 1: Engine Speed And Coolant Temperature Specification
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Data Monitor Display
Courtesy of NISSAN MOTOR CO., U.S.A.
Maintain the following conditions for at least 20 consecutive seconds.

Fig 3: Engine Speed And Coolant Temperature Specification
Courtesy of NISSAN MOTOR CO., U.S.A.
If 1st trip DTC is detected, GO TO "DIAGNOSTIC PROCEDURE " .